Zenner 5/8" x 3/4" multi-jet Water meter, US Gallon with Encoder Output
ZENNER
- AWWA C-708 Multi-Jet Type Magnetic Drive
- Cold Water Meters NITRO I
- Model PMN
- Size: 5/8" x 3/4"
- Registration: US Gallons
- ETR Encoder: Industry Standard Encoder Output with 5' cable w/bare wire end
- Bottom Plate: Brass
- Uses 3/4" meter couplings (sold separately)
- Extra Cable (sold separately)
INTRODUCTION: ZENNER PMN Water Meters utilize a magnetically
driven multi-jet design. They are designed to measure cold
potable water where flow is in one direction only in residential,
commercial, and industrial settings.
OPERATION: Water flows through the meter’s strainer and into the measuring chamber where it drives the impeller. A drive magnet transmits the motion of the impeller to a driven magnet located within the hermetically sealed register. Powerful rare earth magnets eliminate slipping and uncoupling to increase overall accuracy. The magnet is connected to a gear train which translates the impeller’s rotation into volume totalization displayed on the register dial face.
CONSTRUCTION: ZENNER PMN Water Meters consist of three basic components: main case, measuring chamber and sealed register. The main cases are constructed using either C89833 or C89850 Brass Alloys. Measuring Chambers are constructed of a durable synthetic polymer. Registers are available as either direct read or electronic output.
MAINTENANCE: ZENNER PMN Water Meters are engineered and manufactured to provide long-term service and operate virtually maintenance free. The precise simple design allows for interchangeable parts, reducing parts inventory.
REGISTRATION: ZENNER PMN Water Meters utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt, moisture infiltration, and prevents fogging. The register includes a large odometer-type totalization display, center sweep hand (360°) test circle, low flow leak detector. All ZENNER Meters have electronic output capabilities for easy conversion to Automated Meter Reading. 5/8” through 1” capacities
are: 10,000,000 Gallons, 1,000,000 Cubic Feet, 100,000 Cubic Meters, 6 odometer wheels.
CONFORMANCE: ZENNER PMN Water Meters are tested and comply with AWWA C708, ISO 4064, and G13IT19001-ISO9000 performance standards. These Meters comply with the lead-free provisions of the Safe Drinking Water Act and are certified to NSF/ANSI Standards 61 and 372.
TAMPERPROOF FEATURES: Customer removal of the register to obtain free water is prevented through the use of a locking device that requires a special tool, only available to water utilities.
CONNECTIONS: These meters have been designed with ease of installation in mind through the use of built-in wrench pads on meter sizes 5/8” through 1”. Tailpiece/Unions for installations of meters are available as an option for various pipe types, sizes, and misaligned pipes. The 1-1/2” PMN09 and 2” PMN12 flanged meters come with a built-in 1” test port.
WITH ZENNER Encoder Type Registers (ETR)
ETR ENCODER: ZENNER Encoder Type Registers allow utilities to utilize remote reading technology such as AMR/AMI, “touch read”, or remote registration. These ETR’s are programmed for encoded mode (Sensus Protocol/ IU-1203) or can be specially programmed for digital switch output. The ZENNER ETR is not designed for systems that require MBus or 4-20mA outputs. Default encoded output resolution is 10 gallons (all of the moving odometer wheels).
OPERATION: ZENNER Encoder Type Registers either come pre-installed. These registers utilize “Hall Effect” technology which eliminates false reads. These registers are compatible with most Automated Meter Reading systems that recognize switch or encoded technology.
REGISTRATION: ZENNER Encoder Type Registers utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt, moisture infiltration, and prevents fogging. These registers include a large odometer-type totalization display, center sweep hand (360°) test circle and low flow leak detection. The majority of ZENNER Water Meters have electronic output capabilities for easy conversion to Automated Meter Reading technologies.
COMPATIBILITY: These Registers are compatible with any system looking for either encoded mode (Sensus Protocol) or digital switch output. These Registers are also compatible with Itron ERT Water Modules. compatible with VL9-M remote register sold separately.
TAMPERPROOF FEATURES: Customer removal of the register to obtain free water is prevented through the use of a tamper screw.
Downloads
We Also Recommend
